GOST 6659-83 PDF

Full title and description

GOST 6659-83 — Картон обивочный водостойкий. Технические условия (English: Waterproof upholstery covering board. Specifications). The standard specifies technical requirements, sizes, marking and testing methods for waterproof upholstery cardboard used in vehicle interiors.

Abstract

GOST 6659-83 defines three grades of waterproof upholstery board (ВО-1, ВО-2 and ВП), their permitted sheet sizes, dimensional tolerances, key mechanical and physical properties (thickness, density, water absorption, tensile strength, bending and deformation limits), conditioning and test methods, acceptance rules, and packaging/marking/transportation requirements. The standard includes references to test methods in related GOSTs and incorporates later amendments.

General information

• Status: Active (действует).
• Publication date: Introduced 01 January 1984 (designation year 1983 — GOST 6659-83).
• Publisher: ИПК Издательство стандартов (IPK Publishing House of Standards), Moscow (official edition).
• ICS / categories: 85.060 (Paper and board; paper and board technology).
• Edition / version: Original issue designated 6659-83 (official printed edition; later corrections/amendments have been issued and integrated).
• Number of pages: 7 (official brief specification document length in commercial catalogs and reproductions).

Key bibliographic and status details above are taken from published reproductions and catalog records of the standard.

Scope

This standard applies to waterproof upholstery cardboard intended for internal finishing of bodies and cabins of automobiles and tractors. It covers manufacturing marks, permissible sheet sizes, physical and mechanical property limits, test procedures, acceptance and sampling rules, and requirements for packaging, marking, transportation and storage.

Key topics and requirements

• Classification into three marks: ВО-1 (waterproof, mass-colored), ВО-2 (waterproof, mass-colored, higher strength) and ВП (waterproof with one- or two-sided coating for visible parts).
• Standard sheet sizes for different marks (examples: 1170×1030, 1600×1100, 2100×1220 mm depending on mark) and allowable dimensional tolerances.
• Thickness and mechanical property limits (typical thickness classes ~1.75–3.00 mm depending on mark; specified minimum tensile strength, density and maximum water uptake and linear deformation after water exposure and drying).
• Requirement for calendering, surface quality (smooth, clean, without delamination or defects), and optional embossing on the face side.
• Conditioning and test methods referenced to other GOSTs (for example, tensile strength, water absorption, linear deformation and conditioning standards), plus rules for sampling and acceptance (GOST 8047 referenced).
• Provisions for tropical (fungus-resistant) execution by agreement and limits on chemical additives testing frequency.

These technical points and referenced test method cross-references are listed in the standard text and its integrated amendments.

Typical use and users

Primary users are manufacturers and suppliers of automotive and tractor interior trim, materials engineers specifying interior panels and coverings, procurement and quality assurance teams in vehicle assembly plants, testing laboratories performing acceptance and type testing, and standards/technical documentation specialists who incorporate material specifications into design and procurement documents.

Related standards

GOST 6659-83 refers to and uses test methods, sampling and related definitions from other GOSTs (examples in the standard include references to GOST 27015, GOST 13648.5, GOST 12057, GOST 13525.1, GOST 8047 and others). Historically it replaced the earlier GOST 6659-73 and has received formal amendments (noted in catalogs) that were integrated into the text.

Keywords

GOST 6659-83; waterproof upholstery board; upholstery cardboard; automotive interior; ВО-1; ВО-2; ВП; technical conditions; paper and board; 85.060.

FAQ

Q: What is this standard?

A: It is a Soviet / Russian state technical standard (GOST 6659-83) that sets technical requirements and test rules for waterproof upholstery covering board used in vehicle interiors.

Q: What does it cover?

A: It covers grades/marks of upholstery board, permitted sheet sizes and tolerances, physical and mechanical property requirements (thickness, density, tensile strength, water absorption, deformation), test methods and sampling/acceptance rules, plus packaging/marking/transport/storage requirements.

Q: Who typically uses it?

A: Material specifiers and purchasers in the automotive and tractor manufacturing supply chain, QA/testing laboratories, converters and manufacturers of upholstery board, and standards/technical document authors.

Q: Is it current or superseded?

A: Cataloged reproductions and standards databases list GOST 6659-83 as in force (status “действует”) with amendments integrated into the text; it originally entered into force on 01 January 1984. Users should verify current legal status with the national standards body or an authoritative database before critical use.

Q: Is it part of a series?

A: It is a standalone technical specification within paper/board and automotive materials product standards (ICS 85.060); it references and relies on other GOST test-method standards and is linked historically to the earlier GOST 6659-73.

Q: What are the key keywords?

A: Waterproof upholstery board; upholstery cardboard; GOST 6659-83; VO-1; VO-2; VP; vehicle interior; paper and board; water resistance; technical conditions.