GOST 10354-82 PDF

Full title and description

GOST 10354-82 — "Плёнка полиэтиленовая. Технические условия" (English: "Polyethylene film. Specifications"). The standard sets technical requirements, designation and marking, dimensional and physical‑mechanical properties, allowable additives and compositions, test methods, packaging and acceptance rules for polyethylene film produced by extrusion from low‑density (high‑pressure) polyethylene and its compositions for general-purpose, agricultural and packaging applications.

Abstract

GOST 10354-82 defines grades, constructional forms (sheet, tubular/ruкав, полу‑рукав, folded web, etc.), allowable thicknesses and widths, quality classes, and required test methods for polyethylene films including requirements for pigments, stabilizers, slip and antistatic agents, and special food‑grade formulations. The standard has been amended (Changes N 1–5) to reflect testing and application updates.

General information

• Status: Active / действующий.
• Publication date: Approved 02 June 1982; put into effect 01 July 1983. (Original designation: ГОСТ 10354-82).
• Publisher: Approved by Gosstandart (State Committee for Standards of the USSR); published in the standards publishing system (Издательство стандартов / Standartinform era publications).
• ICS / categories: 83.140.10 (polymers and plastics; polyethylene film / packaging films).
• Edition / version: Original 1982/introduced 1983; includes Amendments N 1 (1986), N 2 (1987), N 3 (1991), N 4 (1992) and N 5 (1998).
• Number of pages: 23 pages (standard text).

Scope

The standard applies to polyethylene film manufactured by the extrusion method from low‑density (high‑pressure) polyethylene and from compositions based on it containing pigments (dyes), stabilizers, slip and antistatic agents and modifying additives. It covers films intended for agricultural use (greenhouse and mulching films), reclamation/water‑management uses, packaging for industrial and consumer goods and provisions for food‑contact formulations when permitted by sanitary authorities and referenced food‑contact standards.

Key topics and requirements

• Designation and marking rules (including conditional designations indicating material, grade, additives, film type, thickness, width and quality grade).
• Allowed film forms: sheet (полотно), tubular (рукав), half‑tubular (полурукав), folded, and other constructions; maximum widths and thickness ranges for each form.
• Dimensional tolerances, minimum roll lengths and allowable edge offsets for different film forms and quality grades.
• Mechanical properties: tensile strength, elongation at break, tear resistance and related sampling and test methods.
• Optical and barrier properties: transparency / light transmission, UV‑stabilization requirements for light‑stabilized films, and tables of spectral transmission for certain marks (СТ, СИК, СМ).
• Permitted additives and food‑contact provisions: requirements for food‑grade films and coordination with GOST 16337 (and sanitary approvals) for films intended for packaging foodstuffs.
• Packaging, acceptance, inspection and documentation (marking, lot acceptance, permitted nonconformities and corrective measures).
• Reference test methods and normative links to related GOSTs used for testing and safety (listed in normative references).

Typical use and users

Manufacturers of polyethylene film and film converters, packaging producers, agricultural suppliers (greenhouse/mulch film), construction materials suppliers (vapor/barrier films), quality control and testing laboratories, regulatory and certification bodies, and product designers who specify film materials for consumer goods and industrial packaging. Buyers consult the standard for conformity and selection of appropriate film grades for intended applications.

Related standards

Normative references and related documents frequently cited with GOST 10354-82 include GOST 16337 (requirements for polyethylene grades and food‑contact polymers), GOST 14236-81 and other GOSTs covering polymer testing, safety and sampling methods. The standard itself lists multiple related GOSTs for tests, safety and materials.

Keywords

GOST 10354-82, polyethylene film, LDPE film, plastic film specifications, extrusion film, packaging film, greenhouse film, food‑grade film, film thickness, tensile strength, UV‑stabilized film, ГОСТ.

FAQ

Q: What is this standard?

A: GOST 10354-82 is a Soviet/Interstate standard titled "Плёнка полиэтиленовая. Технические условия" that specifies technical requirements and test methods for polyethylene film produced by extrusion.

Q: What does it cover?

A: It covers film types (sheet, tubular and variants), dimensional and quality requirements, mechanical and optical properties, permitted additives, packaging and acceptance rules, and associated test methods; it also includes provisions for films intended for food contact where allowed.

Q: Who typically uses it?

A: Film manufacturers, packagers, agricultural suppliers, construction material producers, testing laboratories and regulatory/certification bodies use the standard to specify, produce and verify polyethylene films.

Q: Is it current or superseded?

A: As of the latest registry updates the document is listed as "действующий" (active) with amendments N 1–5 incorporated; it remains a referenced normative document for polyethylene film requirements unless replaced explicitly by a newer standard or technical regulation. Check national registries or standards bodies for any later replacements.

Q: Is it part of a series?

A: It belongs to the family of polymer and film standards (ICS 83.140.10) and is cross‑referenced with multiple GOSTs covering polymer grades, testing methods and safety; it replaces earlier versions (e.g., ГОСТ 10354-73) and is maintained with periodic amendments.

Q: What are the key keywords?

A: Polyethylene film, LDPE, extrusion film, packaging film, greenhouse film, technical specifications, GOST 10354-82, food‑grade film, UV stabilization, tensile strength.