GOST 3063-80 PDF

Full title and description

GOST 3063-80 — One lay rope type TK construction 1x19 (1+6+12). Assortment. (Russian: ГОСТ 3063-80 — Канат одинарной свивки типа ТК конструкции 1х19(1+6+12). Сортамент.) This interstate standard specifies the dimensional assortment, nominal diameters, mass and marking groups for single‑lay steel wire ropes of TK construction with a 1×19 wire arrangement.

Abstract

This standard defines the permissible sizes, nominal cross‑sectional areas, approximate weights per 1000 m, marking groups (strength classifications) and related assortment rules for single‑lay steel wire ropes of type TK (construction 1×19). It also notes permitted coatings and production options by agreement between manufacturer and consumer and refers to general technical, testing and acceptance rules in the relevant GOST for steel ropes.

General information

• Status: Active / in force.
• Publication date: Designation year 1980 (GOST 3063-80); introduced into force 1 January 1982.
• Publisher: USSR State Committee for Standards (Gosstandart) — issued as an Interstate Standard (GOST).
• ICS / categories: 77.140.65 (steel wire, wire ropes and related products).
• Edition / version: Original GOST 3063-80 (1980) with Amendments No. 1 and No. 2 (approved in the late 1980s / early 1990s); edition listings appear in later compilations (electronic reprints include amendments).
• Number of pages: 5 (concise standard / assortment table included).

Key bibliographic and status details above are confirmed in contemporary GOST catalogs and commercial standard repositories.

Scope

Applies to single‑lay steel wire ropes with point contact of wires in the rope, of type TK construction 1×19 (arrangement 1+6+12). The standard specifies nominal diameters and dimensional assortment, estimated total cross‑sectional areas of wires, approximate mass per 1000 m (lubricated), marking (strength) groups and production notes (for example, permitted use of galvanized wire by agreement and rounding rules for diameters above 10 mm). For technical requirements, acceptance, testing methods, marking, packaging, transportation and storage it refers to the more general steel rope standard(s) (see Related standards).

Key topics and requirements

• Definition of rope construction: single‑lay TK type with 1×19 wires (1+6+12 arrangement).
• Assortment table of nominal diameters, estimated cross‑sectional areas of all wires and approximate weight per 1000 m (lubricated).
• Marking groups (nominal strength classifications expressed in N/mm or kgf/mm) and guidance on which wire coatings are typical for given strength groups.
• Rules on allowable coatings (plain wire, galvanized) and the requirement that some galvanized constructions be made only by agreement between manufacturer and consumer.
• Dimensional rounding rule: diameters over 10 mm rounded to whole millimetres or to 0.5 mm.
• Reference to general technical requirements, acceptance rules and test methods for steel ropes (see GOST 3241‑91 and related documents).

These technical points and notes (including amendments) are recorded in the standard text and modern GOST repositories.

Typical use and users

Used by manufacturers of steel wire rope, quality and metrology laboratories, procurement and design engineers in lifting, hoisting, marine, mining, construction, oil & gas and other industries where standardized wire rope dimensions and strength classification are required. It is also used by standards bodies and certification/inspection organizations when verifying conformance to GOST assortment and marking rules.

Related standards

Directly related documents include the general steel ropes technical/acceptance standard (GOST 3241‑91) referenced for test methods, acceptance, marking and storage. GOST 3063‑80 replaced the earlier GOST 3063‑66. Other GOSTs covering wire, coatings and rope testing are commonly used in conjunction with this standard.

Keywords

steel wire rope, single‑lay rope, TK construction, 1×19, assortment, nominal diameter, rope weight, marking group, galvanized, GOST 3063-80, ГОСТ 3063-80.

FAQ

Q: What is this standard?

A: GOST 3063-80 is an interstate standard that specifies the dimensional assortment and related parameters for single‑lay steel wire ropes of TK construction (1×19).

Q: What does it cover?

A: It covers nominal diameters, estimated total cross‑sectional area of wires, approximate weight per 1000 m (lubricated), marking (strength) groups, permissible coating/manufacturing notes and rounding rules for certain diameters; it refers users to general standards for testing and acceptance.

Q: Who typically uses it?

A: Rope manufacturers, procurement and design engineers in lifting/marine/mining/construction industries, inspection and certification bodies, and standards organizations.

Q: Is it current or superseded?

A: The standard is listed as active / in force in modern GOST catalogs and repositories; its formal designation is GOST 3063-80 (approved 1980) with introduction on 1 January 1982 and with later amendments recorded. Users should verify any industry‑specific or country‑specific adoption notes before relying on it as the sole normative reference.

Q: Is it part of a series?

A: It forms part of the family of GOSTs covering steel wire and wire ropes and is referenced alongside general rope technical standards (e.g., GOST 3241‑91) and related GOSTs addressing wire materials, coatings and testing.

Q: What are the key keywords?

A: steel wire rope; single‑lay; TK; 1×19; assortment; diameter; weight; marking group; galvanized; GOST.