SHNK 1.02.07-15 PDF

Full title and description

SHNK 1.02.07-15 — "Engineering surveys for construction. Set of rules." This document is a national set of rules (ШНК) used for planning and executing engineering and environmental surveys required in the preparation of design and construction projects.

Abstract

SHNK 1.02.07-15 specifies requirements for the content, scope and organisation of engineering surveys (including geodetic, geotechnical, hydrological, ecological and other site investigation works), reporting formats and the use of survey results in design decisions. It is used to ensure that surveys produce the necessary and sufficient data to support safe, economical and environmentally compatible construction.

General information

• Status: Replaced — the document SHNK 1.02.07-15 has been superseded by SHNK 1.02.07-19 (the later edition covering engineering‑technical surveys / main provisions).
• Publication date: Issued under the edition code "-15" (SHNK 1.02.07-15); users should note a later revision exists (SHNK 1.02.07-19). (See status above for current normative reference.)
• Publisher: National construction regulatory system of the Republic of Uzbekistan — normative documents in the SHNK series are published/maintained under the authority of the national construction/architecture bodies (Ministry of Construction / state bodies responsible for architecture and construction).
• ICS / categories: Group 01–02 in national construction standards (construction norms and rules; engineering surveys / site investigations).
• Edition / version: SHNK 1.02.07-15 (edition code "-15"); superseded by SHNK 1.02.07-19.
• Number of pages: Approximately 117 pages (electronic/PDF edition as listed by document suppliers).

Scope

SHNK 1.02.07-15 covers the procedures and requirements for carrying out engineering surveys that support design and construction projects. It addresses the planning of survey programmes, required types of surveys (topographic/geodetic, geological, hydrogeological, geotechnical, environmental/ecological, and related laboratory testing), data collection and processing, minimum deliverables for design stages, and criteria for using survey data in project decisions. The standard is intended for use on building and linear infrastructure projects where nationally regulated survey practices apply.

Key topics and requirements

• Definition of the scope and objectives of engineering surveys linked to project type and stage.
• Minimum composition of survey programmes: geodetic/topographic, geotechnical, hydrogeological, environmental/ecological, and specialised investigations where required.
• Guidance on sampling, laboratory testing and reporting of soil, groundwater and environmental data.
• Requirements for survey documentation, maps, geotechnical passports and final reports to support design decisions.
• Criteria for the adequacy of survey data for different design stages and classes of complexity.
• Requirements for coordination between survey contractors, designers and authorities; dealing with protected areas, archaeological zones and sanitary protection zones.

Typical use and users

Primary users include engineering survey organisations, geotechnical and geodetic teams, environmental consultants, design institutes and project developers operating in jurisdictions that apply the SHNK normative system (notably Uzbekistan). Regulatory reviewers, permitting authorities and construction contractors also use the document when verifying that site investigations meet required national practice.

Related standards

Other relevant SHNK documents and related national rules include the updated SHNK 1.02.07-19 (replacement/main provisions), SHNK 1.02.08-19 (engineering-geodetic surveys), SHNK 1.02.09-15 (engineering-geological surveys), plus complementary technical regulations and the national system of construction norms and rules. Users should consult the later SHNK 1.02.07-19 for the current mandatory provisions.

Keywords

engineering surveys; site investigation; geodetic surveys; geotechnical investigations; hydrogeology; environmental surveys; construction norms; SHNK; Uzbekistan; survey reporting

FAQ

Q: What is this standard?

A: SHNK 1.02.07-15 is a set of national rules (Свод правил) for engineering surveys used to collect the data necessary for design and construction projects. It defines the organisation, content and reporting of such surveys.

Q: What does it cover?

A: It covers the planning and execution of surveys (topographic/geodetic, geotechnical, hydrogeological, environmental and laboratory testing), required deliverables, and how survey results should be prepared and used in design.

Q: Who typically uses it?

A: Engineering survey firms, geotechnical and geodetic specialists, environmental consultants, design organisations, project owners and regulatory authorities in the SHNK jurisdiction (primarily Uzbekistan) use it to ensure surveys meet national requirements.

Q: Is it current or superseded?

A: SHNK 1.02.07-15 has been superseded — the later document SHNK 1.02.07-19 is the updated normative reference for engineering‑technical surveys; users should refer to the -19 edition for current mandatory requirements.

Q: Is it part of a series?

A: Yes — it belongs to the SHNK series (national construction norms and rules). Related items in the series address geodetic, geological and other specific survey disciplines and broader construction regulation.

Q: What are the key keywords?

A: Engineering surveys; site investigation; geotechnical; geodetic; hydrogeological; environmental; survey programme; SHNK; construction norms.