IEC 61169-29-2005 PDF

Full title and description

St IEC 61169-29:2005 — Radio‑frequency connectors — Part 29: Sectional specification — Miniature radio frequency coaxial connectors model screw, snap‑on, push‑pull or quick‑lock, slide‑in (rack and panel applications) — Characteristic impedance 50 Ω (type 1,0/2,3) — 50 Ω and 75 Ω applications. This publication is a sectional specification (SS) that gives the rules and information needed to prepare detailed specifications (DS) for the listed miniature RF coaxial connector types.

Abstract

IEC 61169-29:2005 defines dimensional, electrical and mechanical characteristics and recommended test/inspection practices for miniature RF coaxial connectors intended for rack‑and‑panel use, with 50 Ω characteristic impedance (type 1,0/2,3) while also addressing 75 Ω applications where relevant. The document is intended to be used as the basis for detail specifications supplied by manufacturers or procuring authorities.

General information

• Status: Published / Active (sectional specification adopted as an IEC international standard and used as base for regional adoptions).
• Publication date: 23 June 2005.
• Publisher: International Electrotechnical Commission (IEC).
• ICS / categories: 33.120.30 (RF connectors).
• Edition / version: Edition 1.0 (2005).
• Number of pages: 55 pages (IEC published PDF).

Scope

The standard is a sectional (intermediate) specification that provides the framework and required items for preparing detailed product specifications for miniature RF coaxial connectors with screw, snap‑on, push‑pull or quick‑lock, slide‑in couplings used in rack and panel applications. It addresses mechanical interface dimensions, calibration references, electrical characteristics (notably 50 Ω characteristic impedance, type 1,0/2,3), recommended functional characteristics for both 50 Ω and 75 Ω uses, and required acceptance and type tests. Typical operating frequency guidance and application notes (for example use with flexible and semi‑rigid cables up to around 10 GHz for many 50 Ω implementations and lower ranges for some 75 Ω uses) are included in the explanatory material used when preparing detail specifications.

Key topics and requirements

• Framework for preparing detail specifications (DS) for miniature RF coaxial connectors.
• Mechanical interface dimensions and mating face profiles for rack‑and‑panel connectors.
• Electrical characteristics: characteristic impedance (50 Ω, type 1,0/2,3) and guidance for 75 Ω applications.
• Recommended functional performance characteristics and limits (return loss/reflection, contact continuity, insulation resistance where applicable).
• Calibration references and dimensional verification procedures.
• Required tests: electrical, mechanical (mating/unmating cycles, retention), climatic and inspection plans for acceptance and type testing.
• Guidance for specifying variants (screw, snap‑on, push‑pull, quick‑lock, slide‑in) and how to reference the sectional specification in a detail specification.

Typical use and users

Used by connector manufacturers, product design engineers, test laboratories, procurement/specification authors, quality engineers and system integrators in telecommunications, broadcast, RF and microwave equipment, test & measurement and related industries. Typical tasks include producing detail specifications for production, defining acceptance/test plans, and ensuring interoperability of rack‑and‑panel miniature RF coaxial connectors.

Related standards

This part is one of many in the IEC 61169 series; the generic requirements and measurement methods are covered in IEC 61169‑1 (generic specification) and other sectional parts address specific connector types and series. National and regional adoptions exist (for example EN/EN‑adopted versions). When writing or applying a DS, reference to IEC 61169‑1 for test methods and to the specific IEC 61169 sectional part appropriate to the connector family is recommended.

Keywords

RF connector, coaxial connector, miniature coax, sectional specification, detail specification, 50 ohm, 75 ohm, type 1,0/2,3, rack and panel, screw coupling, snap‑on, push‑pull, quick‑lock, slide‑in, IEC 61169.

FAQ

Q: What is this standard?

A: IEC 61169‑29:2005 is a sectional specification that sets out the information and rules needed to prepare detail specifications for miniature RF coaxial connectors (screw, snap‑on, push‑pull, quick‑lock, slide‑in) intended for rack and panel applications, focusing on 50 Ω characteristic impedance (type 1,0/2,3) while also covering 75 Ω usage where relevant.

Q: What does it cover?

A: It covers mechanical interface dimensions, calibration references, recommended electrical and functional characteristics, and required tests/inspection procedures to be included in a detail specification for the connector types listed. The document is intended as the basis from which product‑specific detail specifications are prepared.

Q: Who typically uses it?

A: Connector manufacturers, product designers, test laboratories, standards committees, procurement/spec authors and quality engineers in RF, telecommunications, broadcast and measurement sectors.

Q: Is it current or superseded?

A: IEC 61169‑29:2005 is the first edition published 23 June 2005. The IEC webstore lists edition 1.0 (2005) and a stability date noted on the IEC entry; users should check national adoption records or the IEC catalogue for any later amendments or revisions before relying on the standard for new procurements.

Q: Is it part of a series?

A: Yes — it is part of the IEC 61169 family of standards for radio‑frequency connectors. The generic requirements and measurement methods are covered by IEC 61169‑1, and many other parts of IEC 61169 address particular connector types and series. Refer to IEC 61169‑1 for test method harmonization.

Q: What are the key keywords?

A: RF connector, coaxial connector, miniature, 50 Ω, 75 Ω, rack and panel, screw coupling, snap‑on, push‑pull, quick‑lock, slide‑in, sectional specification, detail specification, IEC 61169.