IEC 61753-083-2-2007 PDF

Full title and description

Fibre optic interconnecting devices and passive components performance standard - Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment. This part of IEC 61753 specifies the minimum initial test and measurement requirements and severities that a single-mode, non‑connectorised pigtail C-band/L-band WDM device shall satisfy to be classified in Category C (controlled environment).

Abstract

IEC 61753-083-2:2007 defines performance classification, required measurements and test severities for non-connectorised single‑mode C‑band/L‑band WDM passive devices intended for controlled indoor environments (Category C). The document covers optical performance limits (insertion loss, isolation, passband, return loss), environmental and mechanical test requirements applicable to devices with pigtails, and the acceptance criteria to demonstrate conformity with the category.

General information

• Status: Published / Active (performance standard).
• Publication date: 20 March 2007.
• Publisher: International Electrotechnical Commission (IEC).
• ICS / categories: 33.180.20 (Fibre optic interconnecting devices and passive components).
• Edition / version: Edition 1.0 (2007).
• Number of pages: 27 pages.

Scope

This standard establishes the minimum initial tests, measurements and severities required to classify single‑mode C‑band/L‑band WDM passive devices with non‑connectorised pigtails into IEC performance Category C (controlled environment). It applies to devices intended for indoor controlled environments and addresses optical performance, environmental conditioning, mechanical stress tests and the pass/fail criteria necessary for product categorization under the IEC 61753 series framework.

Key topics and requirements

• Definition of Category C (controlled environment) test suite and severities for WDM devices.
• Initial optical measurements: insertion loss, isolation (channel/to-channel), passband characteristics and return loss.
• Environmental tests relevant to controlled indoor use (temperature cycling, damp heat, etc.) and associated pass/fail criteria.
• Mechanical and handling tests for pigtails (strain, static side load, flexing where applicable).
• Requirements for test setup, measurement procedures and reporting to demonstrate conformity.
• Classification guidance within the IEC 61753 framework and references to applicable basic test procedures (IEC 61300 series).

Typical use and users

Manufacturers of passive optical WDM components, test laboratories, product qualification engineers, and procurement/specification teams use this standard to define and verify performance for non‑connectorised single‑mode C‑band/L‑band WDM devices intended for controlled indoor environments. It is used to set product acceptance criteria, support design verification, and harmonize test methods between suppliers and customers.

Related standards

IEC 61753-083-2 is part of the IEC 61753 performance-standard series and is intended to be read alongside: IEC 61753-1 (General and guidance for performance standards) for category definitions and test selection, the IEC 61300 series (basic test and measurement procedures) for test methods, and other part‑specific IEC 61753 documents covering different WDM bands, connector types and device forms. National/adopted versions (EN/BS/DIN forms) also exist for regional use.

Keywords

IEC 61753, WDM, C‑band, L‑band, non‑connectorised, pigtail, single‑mode, Category C, controlled environment, passive optical components, insertion loss, isolation, test severities.

FAQ

Q: What is this standard?

A: IEC 61753-083-2:2007 is an international performance standard that specifies minimum initial test and measurement requirements and severities for non‑connectorised single‑mode C‑band/L‑band WDM devices to be classified in Category C (controlled environment).

Q: What does it cover?

A: It covers optical performance measurements (such as insertion loss, isolation and return loss), environmental and mechanical tests appropriate for controlled indoor environments, and the pass/fail criteria and reporting needed to demonstrate conformity with IEC 61753 Category C for devices with single‑mode non‑connectorised pigtails.

Q: Who typically uses it?

A: Component manufacturers, independent test laboratories, qualification engineers, and procurement/specification teams in the telecommunications and optical‑component supply chains use this standard to qualify and specify passive WDM devices for indoor controlled applications.

Q: Is it current or superseded?

A: IEC 61753-083-2 was published in March 2007 and is listed with a stability date in IEC records; users should verify national adoption status or any later revisions or replacement parts before applying it to new procurements. For related parts in the 61753 family, some have been revised or reissued in later years (consult IEC publications for the latest amendments and replacements).

Q: Is it part of a series?

A: Yes. It is one part of the IEC 61753 performance‑standard series for fibre optic interconnecting devices and passive components; Part 1 provides general guidance and category definitions, and other numbered parts cover different device types, bands and connection styles.

Q: What are the key keywords?

A: C‑band, L‑band, WDM, non‑connectorised, pigtail, single‑mode, Category C, controlled environment, IEC 61753, optical performance, insertion loss, isolation.