IECEE OD-2020-F6-2017 PDF

Full title and description

St IECEE OD-2020-F6-2017 — IECEE Operational Document OD‑2020 Form F6 (Product Description Template). This operational document provides the standardized template (Form F6) used within the IECEE system/CB Scheme for submitting a concise product description to support testing, certification and record-keeping.

Abstract

OD‑2020‑F6 (2017) defines the layout and minimum content required in a Product Description Template (Form F6) so that National Certification Bodies (NCBs), Certification Bodies (CBs), testing laboratories and manufacturers present product-identifying and technical summary information consistently during the CB/IECEE conformity assessment process. The form is intended to streamline test planning, certificate preparation and cross‑reference between test reports and certificates.

General information

• Status: Active (listed by commercial standards distributors as currently available).
• Publication date: 2017 (document identifier includes the year 2017).
• Publisher: IECEE (International Electrotechnical Commission system for conformity assessment / IEC).
• ICS / categories: Operational document for conformity assessment within the IECEE/CB Scheme (related to electrotechnical conformity-assessment procedures rather than a single product technical ICS number).
• Edition / version: Identified as OD‑2020‑F6 with the 2017 release (Form F6). Specific edition/revision numbering is shown in the document header when issued.
• Number of pages: Not published openly in all reseller listings; typical IF-format templates of this type are short (commonly 1–6 pages). For exact page count consult the IECEE Secretariat or the official document file.

Scope

This Operational Document provides a uniform product description template to be completed by applicants, manufacturers or testing bodies when submitting products for IECEE/CB testing and certification. The scope covers the fields and explanatory notes required to identify the product, model(s), ratings, key characteristics, variants/accessories, applicable standards and any special testing conditions or limitations needed to plan tests and prepare certificates. The form is intended for use across the IECEE/CB Scheme and related IECEE operational procedures.

Key topics and requirements

• Standardized product identification: model designation, trade name, manufacturer and factory addresses.
• Essential ratings and operating characteristics (electrical ratings, frequency, power, environmental class).
• List of product variants, options and accessories that may affect testing or marking.
• Declaration of applicable IEC/ISO/EN standards and any national differences or deviations.
• Notes on special test conditions, test samples provided, and references to associated test report(s) or sample identification.
• Fields to support traceability between test reports, certificates and application paperwork.

Typical use and users

Primary users are manufacturers and their technical/certification teams preparing CB/IECEE applications, National Certification Bodies (NCBs), CBs and accepted Testing Laboratories (CBTL/CBTLs). The template is used during application submission, test planning, report preparation and certificate issue to ensure consistent, machine- or human-readable product summaries are retained with the certification record. It is also used by consultants and compliance specialists who prepare documentation for IECEE assessments.

Related standards

OD‑2020‑F6 is part of the family of IECEE operational documents and form templates (OD‑2020 series and related ODs) used by the CB Scheme and IECEE system, such as other OD‑2020 forms (OD‑2020‑F1, F2, F3, F4, F5, F7, F8) and the CB rules/ODs that govern certificate issuance, test report forms and national differences. Users should consult the IECEE index of operational documents for cross‑references and the most recent versions of related ODs.

Keywords

IECEE, OD‑2020‑F6, Form F6, Product Description Template, CB Scheme, operational document, product description, certification, test planning, NCB, CBTL.

FAQ

Q: What is this standard?

A: St IECEE OD‑2020‑F6‑2017 is an IECEE Operational Document that provides the Form F6 Product Description Template used within the IECEE/CB conformity assessment system to capture concise product-identifying and technical summary information.

Q: What does it cover?

A: It covers the structure and minimum content for a product description used in CB/IECEE applications — fields for model identification, ratings, variants, applicable standards, accessories and notes needed to plan tests and link reports to certificates.

Q: Who typically uses it?

A: Manufacturers (and their compliance teams), applicants to the CB Scheme, National Certification Bodies (NCBs), Certification Bodies (CBs) and accepted testing laboratories (CBTLs) use this template when preparing or processing CB applications and related documentation.

Q: Is it current or superseded?

A: Listings at commercial standards distributors show OD‑2020‑F6‑2017 as active; however IECEE operational documents can be revised. Always confirm with the IECEE Secretariat or the latest official IECEE document index for the current revision before use.

Q: Is it part of a series?

A: Yes — Form F6 is part of the OD‑2020 series of IECEE operational forms and sits alongside other OD‑2020 forms (F1–F8 and others) and numerous IECEE ODs that together define procedures, templates and rules for the CB Scheme and IECEE system.

Q: What are the key keywords?

A: IECEE, Product Description Template, Form F6, CB Scheme, operational document, certificate supporting data, product identification.