ISO 20187-3-2022 PDF

Full title and description

ISO 20187-3:2022 — Inflatable play equipment — Part 3: Additional safety requirements and test methods for snappies. This part of ISO 20187 specifies additional safety requirements and associated test methods for inflatable play equipment (commonly called "snappies") whose primary activities are climbing and sliding, intended for use by children aged up to 14 years (individual and collective use).

Abstract

This part of ISO 20187 is applicable to inflatable play equipment intended for children fourteen years and under and specifies additional safety requirements to address risks associated with snappies (climbing/sliding inflatables). It sets out measures to minimise accidents for users and establishes information that manufacturers and suppliers must provide. The document excludes inflatable water‑borne play equipment, domestic inflatable toys, air‑supported buildings, rescue/protection inflatables and other inflatables whose primary activity is not bouncing or sliding.

General information

• Status: Published (International Standard).
• Publication date: November 2022 (published 28 November 2022 in publisher and distribution listings).
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 97.200.99 (Playground equipment; inflatable play equipment).
• Edition / version: Edition 1 — 2022.
• Number of pages: 5 (official ISO publication pagination; some national adoptions or national bodies' publications may show different pagination).

Scope

Specifies additional safety requirements and test methods for inflatable play equipment (snappies) where climbing and sliding are the primary activities. The standard is intended to reduce foreseeable hazards for children up to 14 years of age when equipment is used as intended or in a reasonably foreseeable manner. It explicitly excludes inflatable water‑borne play and leisure equipment, domestic inflatable toys, air‑supported buildings, rescue/protection inflatables and inflatables where the primary activity is not bouncing or sliding.

Key topics and requirements

• Definitions and classification specific to "snappies" (inflatable climbing/sliding equipment).
• Additional safety performance requirements addressing hazards from design, construction and user interaction (stability, openings, edge protection, restraint, entrapment and fall zones as applicable).
• Test methods to verify compliance with the specified safety requirements (mechanical and dimensional checks, anchorage/fixture tests, where relevant).
• Information and marking requirements to be supplied with the equipment (intended age range, installation/anchoring instructions, warnings and maintenance guidance).
• Exclusions and limits of applicability (waterborne inflatables, domestic toys, rescue/protection equipment, air‑supported buildings).

Typical use and users

Primary users of this standard include manufacturers and designers of inflatable play equipment, conformity assessment and testing laboratories, product safety engineers, rental operators and event organisers, national standards bodies and regulatory authorities responsible for playground/attraction safety. The standard is used to design, test, document and supply snappies that meet internationally accepted safety criteria.

Related standards

ISO 20187 is published as a multipart series. Relevant related documents include ISO 20187-1:2022 (Part 1 — Safety requirements and test methods) and ISO 20187-2:2022 (Part 2 — [other inflatable categories / requirements]) which, together with Part 3, replace the earlier consolidated ISO 20187:2016 that has been withdrawn. Users commonly consult Parts 1–3 together to cover general and category‑specific requirements.

Keywords

inflatable play equipment, snappies, safety requirements, test methods, children’s play equipment, anchorage, warnings, ISO 20187, playground safety.

FAQ

Q: What is this standard?

A: ISO 20187-3:2022 is Part 3 of the ISO 20187 series and provides additional safety requirements and test methods specifically for snappies (inflatable climbing/sliding play equipment) intended for children up to 14 years.

Q: What does it cover?

A: It covers safety performance requirements, test methods, and information/marking obligations aimed at reducing foreseeable hazards for users of snappies; it also lists types of inflatables and situations that are excluded from its scope.

Q: Who typically uses it?

A: Manufacturers, designers, testing labs, conformity assessment bodies, rental operators, event organisers and regulators involved with inflatable play equipment safety.

Q: Is it current or superseded?

A: ISO 20187-3:2022 is a current published part of the ISO 20187 series (published November 2022). It forms part of the replacement for ISO 20187:2016, which has been withdrawn and superseded by the multipart 2022 publications.

Q: Is it part of a series?

A: Yes — it is Part 3 of the ISO 20187 series (Parts 1, 2 and 3 published 2022) that together address general and category‑specific safety requirements and test methods for inflatable play equipment.

Q: What are the key keywords?

A: Inflatable play equipment; snappies; safety requirements; test methods; children; anchorage; warnings; ISO 20187.