NTP RK 08-01.1-2017 PDF

Full title and description

NTP RK 08-01.1-2017 — "Designing of earthquake resistant buildings and facilities. Part. General provisions. Earthquake actions". This normative technical provision sets out national guidance for assessment and application of seismic (earthquake) actions in the design of buildings and civil structures in the Republic of Kazakhstan.

Abstract

NTP RK 08-01.1-2017 provides the general principles, definitions and mandatory procedures for determining seismic actions, seismic parameters and analysis methods to be used in structural design. It aligns Kazakhstan practice with Eurocode 8 principles and nationalizes seismic actions, spectra, site classification and design procedures needed to ensure seismic-resistant design of buildings and facilities.

General information

• Status: Active (in force).
• Publication date: Approved and introduced by order on 20 December 2017 (Order No. 312-НҚ), effective from 20.12.2017.
• Publisher: Committee responsible for construction and housing (Committee for Construction and Housing and Communal Services under the relevant Ministry at the time of approval) — approved by Order No. 312-НҚ (20 Dec 2017).
• ICS / categories: 91.040 (Buildings); related subfields for building structures and seismic protection (e.g., 91.080, 91.120).
• Edition / version: 2017 edition (NTP RK 08-01.1-2017). This version supersedes earlier national technical provisions in the same series (previous 2012 edition existed for the same topic).
• Number of pages: Approximately 101 pages (electronic PDF distribution commonly cited as 101 pages).

Scope

The document applies to the design of earthquake-resistant buildings and structures across Kazakhstan. It covers determination of seismic actions (ground motion parameters and spectra), classification of sites, selection of analysis methods (simplified procedures, response-spectrum and time-history methods), determination of seismic load combinations and requirements for assessing structural behaviour under seismic loading. The provision is intended to be used alongside national application of EN 1998‑1 (Eurocode 8) where referenced.

Key topics and requirements

• Definition of seismic actions and national parameters for earthquake loading (seismic zoning, design peak ground acceleration and spectral shapes).
• Site classification and effect of local soil conditions on design spectra and amplification.
• Recommended analysis methods: simplified checks, response spectrum analysis and time-history (dynamic) analysis, with rules for modal combination and use of CQC/CQC-like methods.
• Rules for selection of importance (category) and ductility class of structures and corresponding seismic coefficients.
• Requirements for load combinations including seismic actions and other permanent/variable actions.
• Guidance for foundations and interaction effects under seismic excitation and for consideration of seismic isolation where applicable (in later related NTP parts).
• Compatibility and application notes with SP RK / Eurocode 8 national application documents (SP RK EN 1998-1:2004/2012 and national annexes).

Typical use and users

Primary users are structural and geotechnical engineers, design organisations, seismic specialists, building code auditors and technical reviewers working on building and infrastructure projects in Kazakhstan. Software developers and consultants performing dynamic/seismic analysis also use the document to implement national seismic parameters and analysis procedures. Regulators and certification bodies refer to it when checking code compliance.

Related standards

Key related documents include SP RK EN 1998‑1:2004/2012 (Eurocode 8 national application for Kazakhstan), SP RK 2.03‑30‑2017 (Construction in seismic areas), and other parts of the NTP RK 08‑01.x series addressing specific design topics (e.g., seismic isolation, foundations, and detailed provisions in subsequent parts). The NTP RK series forms a package of voluntary/technical guidance accompanying the national structural rules.

Keywords

seismic design, earthquake actions, NTP RK 08-01.1-2017, Kazakhstan, Eurocode 8, SP RK EN 1998-1, seismic zoning, response spectrum, time-history analysis, site classification

FAQ

Q: What is this standard?

A: NTP RK 08-01.1-2017 is a national technical provision for Kazakhstan titled "Designing of earthquake resistant buildings and facilities — Part: General provisions. Earthquake actions", giving rules and guidance for determining seismic actions used in structural design.

Q: What does it cover?

A: It covers seismic actions (design ground motions and spectra), site classification, basic analysis methods (response spectrum and time-history), load combinations with seismic actions, and general principles for seismic-resistant design to be applied with the national application of Eurocode 8.

Q: Who typically uses it?

A: Structural and geotechnical engineers, seismic specialists, design firms, reviewers and software vendors implementing Kazakhstan national seismic parameters in structural analysis tools.

Q: Is it current or superseded?

A: The 2017 edition (NTP RK 08-01.1-2017) is the current published 2017 version introduced by Order No. 312-НҚ on 20 December 2017. Subsequent administrative updates to the list of approved normative documents (orders affecting lists) have been issued, but this NTP RK part remains the 2017 technical provision for seismic actions unless explicitly replaced by a newer NTP RK part. Users should verify the latest status with the national standards/committee registry before critical compliance decisions.

Q: Is it part of a series?

A: Yes — it is one part of the NTP RK 08-01.x series covering seismic design topics; other related parts address more specific design areas (foundations, seismic isolation, additional procedural and detailing rules). The series is intended to be used together with SP RK EN 1998 national application documents.

Q: What are the key keywords?

A: Seismic design, earthquake actions, response spectrum, time-history analysis, site classification, Eurocode 8, NTP RK, Kazakhstan building codes.