ANSI ICEA S-109-709-2011 PDF

Full title and description

ANSI/ICEA S-109-709-2011 — Standard for Distribution Frame‑Wire Technical Requirements. This ICEA/ANSI standard defines the technical, material, electrical and mechanical requirements, testing, marking and quality criteria for distribution frame‑wire (telecommunications distribution wiring) used in outside‑plant and inside‑plant distribution frames and related installations.

Abstract

This standard specifies construction, conductor and insulation types, dimensional tolerances, electrical performance (resistance, insulation, dielectric), mechanical properties (tensile, elongation), environmental and aging tests, sample and lot testing procedures, marking, packaging and quality assurance practices for distribution frame‑wire intended for telecommunications distribution frames. It is intended to ensure interoperability, long‑term reliability and safety of wiring used in distribution frame applications.

General information

• Status: Current / Active (listed as current in vendor and standards listings).
• Publication date: 2011 (standard designation) — some catalogue/publisher records list a publication/availability date in 2012 (catalog listing).
• Publisher: Insulated Cable Engineers Association (ICEA); available as an ANSI/ICEA document.
• ICS / categories: Telecommunications (ICS 33 — relevant sub‑categories for telecommunication systems and components, e.g. 33.040 / 33.120).
• Edition / version: 2011 edition (document commonly shown as S‑109‑709:2011; some listings show R2018 reaffirmation).
• Number of pages: Approx. 26 pages (publisher/catalogue listings indicate a short technical standard length).

Scope

Defines minimum technical and test requirements for copper distribution frame‑wire used in telecommunications distribution frames and related distribution wiring systems. It covers conductor materials and construction, insulation and jacket materials, dimensional and physical tolerances, electrical characteristics, required factory and acceptance tests, sample procedures, marking and packaging, and basic installation considerations where relevant to product specification and procurement.

Key topics and requirements

• Conductor materials and stranding (copper conductor specifications and acceptable constructions).
• Insulation and jacket material types, thicknesses and properties (electrical and environmental performance).
• Dimensional tolerances, color coding and marking requirements for identification.
• Electrical requirements: DC resistance, insulation resistance, dielectric strength and mutual capacitance where applicable.
• Mechanical requirements: tensile strength, elongation, flexibility and bending performance.
• Environmental and aging tests: temperature cycling, heat aging, humidity, ultraviolet exposure (as applicable).
• Sampling, lot acceptance and factory test procedures, and required test report data.
• Quality assurance, packaging, labeling and handling instructions to maintain product integrity in storage and shipment.

Typical use and users

Used by telecommunications equipment manufacturers, cable and wire producers, network design engineers, specification writers, purchasing and procurement teams, installation contractors and utility/telecom operators who specify, buy, install or inspect distribution frame wiring for central offices, headends, remote terminals and other distribution frame facilities.

Related standards

Related ICEA/ANSI and industry standards for telecommunications and cable products — for example other ICEA communications cable standards (S‑103, S‑90 series), ICEA standards for service and drop wires, and complementary NEMA/TIA/ITU specifications covering related cabling, testing methods and installation practices. See ICEA standards catalog for adjacent telecommunication wiring standards.

Keywords

Distribution frame wire, frame‑wire, telecommunications wire, ICEA S‑109‑709, ANSI/ICEA, conductor, insulation, telecommunication distribution, wiring technical requirements, sampling and testing, cable specification.

FAQ

Q: What is this standard?

A: ANSI/ICEA S‑109‑709‑2011 is an ICEA technical standard that sets minimum requirements and test methods for distribution frame‑wire used in telecommunications distribution frames.

Q: What does it cover?

A: It covers conductor and insulation construction, electrical and mechanical performance criteria, environmental and aging tests, sampling and acceptance tests, marking, packaging and quality requirements for distribution frame‑grade wire.

Q: Who typically uses it?

A: Cable and wire manufacturers, network equipment makers, telecom operators, installation contractors, procurement/specification engineers and test laboratories use it to specify, manufacture, test and accept distribution frame‑wire.

Q: Is it current or superseded?

A: The document is listed in ICEA and standards catalogues as the 2011 edition and is shown as current/active in vendor and catalog listings; some catalog entries also show a reaffirmation or catalog publication entry (R2018 or 2012 availability listing). Users should check ICEA or authorized distributors for the latest status or any amendments before procurement.

Q: Is it part of a series?

A: Yes — it is one of a family of ICEA telecommunications cable and wire technical requirements standards (other S‑series documents cover riser cables, service wires, optical fiber cables, station wire, etc.).

Q: What are the key keywords?

A: Distribution frame‑wire, ICEA S‑109‑709, ANSI/ICEA, telecom wire, conductor, insulation, test methods, marking, packaging.