ARINC REPORT 433-2-2013 PDF

Full title and description

St ARINC REPORT 433-2-2013 — "Standard Measurements for Flight Simulation Quality". This ARINC report defines measurement methods, performance parameters and reporting formats used to assess fidelity and quality of flight simulators and synthetic training devices (STDs), covering visual, motion, audio and related system performance characteristics for training and evaluation purposes.

Abstract

Report 433-2 (2013) is a supplement to ARINC Report 433 that provides a structured set of standard measurements and test procedures to quantify simulator fidelity. The document gives definitions, instrumentation guidance, data-recording conventions and example measurement reports so manufacturers, operators and authorities can consistently evaluate simulator subsystems (visual, motion, audio, time-delay and performance). The supplement format clarifies acceptance checks and recurring quality-assurance measurements for STDs.

General information

• Status: Active (published and in use as a 2013 supplement to Report 433).
• Publication date: April 5, 2013.
• Publisher: Aeronautical Radio, Incorporated (ARINC) / FSEMC (FSTD Simulation Equipment/Methods Committee) adoption.
• ICS / categories: Simulation and measurement; radiocommunications / related avionics categories (as indexed for the report).
• Edition / version: Report 433-2 (supplement), 2013 edition.
• Number of pages: Approximately 60 pages.

Key bibliographic and status details above are taken from published listings and ARINC document summaries.

Scope

This report specifies standardized measurement procedures and performance metrics for evaluating the quality of flight simulation devices used for training and testing. It applies to synthetic training devices and full flight simulators where quantitative measurement of subsystem performance (visual system resolution and latency, motion system response, audio fidelity, time-lag measurement, and objective handling/flight-dynamics comparisons) is required for acceptance, periodic quality assurance, or development verification. The scope includes instrumentation recommendations, data collection formats and examples of reporting results.

Key topics and requirements

• Definitions and classification of simulator fidelity and measurement objectives (visual, motion, audio, time-domain behavior).
• Standard test procedures for visual system performance: resolution, field-of-view, latency, contrast and image stability.
• Motion system measurements: cueing performance, bandwidth, step/steady-state response and repeatability.
• Audio system measurements: level, frequency response and intelligibility checks.
• Time-lag and synchronisation tests across subsystems (end-to-end latency measurement methods).
• Instrumentation and data-logging conventions, test-report formats and example measurement charts.
• Acceptance and periodic quality-assurance recommendations for STD operators and manufacturers.

These topics and requirement summaries are drawn from the report's measurement-focused content and examples.

Typical use and users

Primary users include flight-simulator manufacturers, STD/FFS operators, training organizations, civil aviation authorities and independent test laboratories. Typical use cases are factory acceptance testing, type-acceptance / qualification support, periodic quality assurance and fidelity benchmarking during simulator upgrade or rehost projects. Engineers performing system integration, verification and validation of visual/motion/audio subsystems will also use the report as a measurement reference.

Related standards

Related documents include the original ARINC Report 433 and other ARINC supplements in the 433 family (report and supplement series), plus industry guidance on FSTD qualification and relevant regulatory material from civil aviation authorities that reference standardized measurement and acceptance criteria for training devices. The report is intended to be used alongside organizational or regulatory FSTD qualification standards.

Keywords

flight simulation, simulator fidelity, synthetic training device (STD), measurement procedures, visual system, motion cueing, audio fidelity, latency, ARINC 433-2, simulator acceptance, test report.

FAQ

Q: What is this standard?

A: ARINC Report 433-2:2013 is a supplement in the ARINC 433 series titled "Standard Measurements for Flight Simulation Quality" that defines measurement methods and reporting formats for evaluating simulator subsystem performance.

Q: What does it cover?

A: It covers objective test procedures and metrics for visual, motion and audio subsystems, time-lag and synchronization measurements, recommended instrumentation and example report formats used for acceptance and ongoing quality assurance of STDs and full flight simulators.

Q: Who typically uses it?

A: Manufacturers, simulation integrators, training centers, civil aviation authorities, independent test labs and simulator engineers use the report for acceptance testing, validation and periodic quality checks.

Q: Is it current or superseded?

A: The 2013 supplement (Report 433-2) remains the published supplement to ARINC Report 433; listings indicate it is active as the 2013 supplement. Users should verify with ARINC/standards providers or regulatory references for any newer supplements or revisions beyond April 2013.

Q: Is it part of a series?

A: Yes — it is a supplement in the ARINC Report 433 family (Report 433 and subsequent supplements such as 433-1, 433-2). The supplement model provides incremental measurement and method updates to the base Report 433.

Q: What are the key keywords?

A: Flight simulation, simulator fidelity, measurement, STD, visual latency, motion cueing, audio fidelity, acceptance testing, ARINC 433-2.