ASME SPPE 2C-1995 PDF

Full title and description

St ASME SPPE 2C-1995 — ASME SPPE-2 Addenda C (1995). An addendum to ASME SPPE-2, the SPPE series addresses accreditation and requirements for testing laboratories performing examinations and tests on Safety and Pollution Prevention Equipment (SPPE) used in offshore oil and gas operations.

Abstract

ASME SPPE 2C-1995 is an addendum (C) to the ASME SPPE-2 document series. It provides clarifications and additional requirements for the accreditation of testing laboratories that evaluate safety and pollution prevention equipment (such as surface, underwater and subsurface safety valves and related actuators) for offshore oil and gas service. The addendum refines laboratory scope, personnel qualifications, equipment calibration and test-reporting provisions introduced in the SPPE-2 accreditation standard.

General information

• Status: Published as Addendum C (1995) to ASME SPPE-2; historically referenced in offshore SPPE programs. Users should check ASME for the current official status or any withdrawal/supersession notices.
• Publication date: 1995 (Addendum C to ASME SPPE-2).
• Publisher: American Society of Mechanical Engineers (ASME).
• ICS / categories: Standards for testing laboratories; offshore oil & gas safety equipment; quality assurance and certification.
• Edition / version: Addendum C to ASME SPPE-2 (1995).
• Number of pages: Approximately 12 pages (addenda to a primary standard — page count varies by print/PDF release).

Scope

This addendum applies to the accreditation criteria and supplementary technical and procedural requirements for laboratories that perform conformity testing, type testing, performance testing and related examinations of Safety and Pollution Prevention Equipment (SPPE) intended for offshore oil and gas service. It is intended to be used in conjunction with the base ASME SPPE-2 accreditation standard and covers laboratory organization, personnel competence, equipment calibration and maintenance, test method control, test records and reporting, and proficiency testing or interlaboratory comparisons where applicable.

Key topics and requirements

• Scope and applicability of accreditation for SPPE testing laboratories (types of tests and equipment covered).
• Minimum qualifications and training expectations for laboratory technical staff and test operators.
• Laboratory quality management elements: test method control, documentation, traceability and records retention.
• Calibration, maintenance and verification requirements for test equipment and instrumentation.
• Requirements for test procedures, acceptance criteria, and reporting formats for SPPE test results.
• Provisions for proficiency testing, interlaboratory comparisons and periodic reassessment of laboratory competence.
• Guidance on manufacturer / laboratory interfaces for witness testing, custody of samples and confidentiality.

Typical use and users

Used by testing laboratories seeking accreditation to perform SPPE testing; by manufacturers and remanufacturers of safety valves and associated actuators; by regulatory compliance teams and procurement engineers in oil and gas operators; and by certifying bodies and auditors concerned with offshore equipment safety and pollution-prevention conformity.

Related standards

Typically used alongside or referenced with the following standards and regulatory documents: ANSI/ASME SPPE-1 (Quality assurance and certification for SPPE), API specifications for wellhead and valve equipment (for example API 6A / 6AV1 and API 14A), API Spec Q1 (quality programs) and applicable national offshore regulations that reference SPPE accreditation requirements. Users should also check current BSEE/30 CFR requirements and any later ASME revisions or replacement documents.

Keywords

SPPE, ASME, SPPE-2C, addendum C, testing laboratory accreditation, safety and pollution prevention equipment, offshore, subsurface safety valve, laboratory QA, calibration, proficiency testing

FAQ

Q: What is this standard?

A: ASME SPPE 2C-1995 is Addendum C (1995) to the ASME SPPE-2 standard series. It provides supplementary accreditation and laboratory-level technical requirements for organizations that test safety and pollution prevention equipment for offshore oil and gas operations.

Q: What does it cover?

A: It covers additional or clarified requirements for accrediting labs that perform tests on SPPE — including personnel qualifications, test-equipment calibration and maintenance, control of test methods, reporting, and proficiency testing arrangements — used together with the base SPPE-2 accreditation standard.

Q: Who typically uses it?

A: Accredited and aspiring test laboratories, manufacturers and remanufacturers of SPPE (valves and actuators), certifying bodies, oil and gas operator compliance teams, and procurement/specification engineers who require validated test results for safety-critical equipment.

Q: Is it current or superseded?

A: The addendum was published in 1995 as part of the SPPE-2 series. Over time regulatory references and quality assurance recognition for SPPE have evolved; some ASME SPPE documents have been listed or handled differently in ASME catalogs and regulatory guidance. For procurement, compliance or certification decisions (especially in the United States) you should verify the standard’s current status and any superseding documents directly with ASME or the relevant regulatory authority before relying on it.

Q: Is it part of a series?

A: Yes — it is one of multiple addenda in the ASME SPPE-2 series (SPPE-2, SPPE-2A, SPPE-2B, SPPE-2C, etc.) and is used together with ASME SPPE-1 (quality assurance/certification requirements) and the main SPPE-2 accreditation document.

Q: What are the key keywords?

A: SPPE, accreditation, testing laboratory, ASME, offshore safety valves, subsurface safety device, quality assurance, calibration, proficiency testing.