IEC 61319-1-1995 PDF

Full title and description

Interconnections of satellite receiving equipment — Part 1: Europe (St IEC 61319-1:1995). This international standard specifies the electrical and mechanical interconnection, matching values and signalling for satellite receiving equipment intended for individual television and sound‑radio broadcast reception in the 10.70 GHz to 12.75 GHz band.

Abstract

IEC 61319-1:1995 defines interface characteristics, matching values, control/polarization signalling (including pulse timing requirements) and related test information required to ensure interoperability of satellite receivers and associated equipment in the European frequency allocations around 10.70–12.75 GHz. The standard is published in English/French and includes technical specifications and normative requirements for connectors, signalling pulses and polarization control.

General information

• Status: Current (listed as current on the IEC Webstore; stability date indicated).
• Publication date: 1995-11-27.
• Publisher: International Electrotechnical Commission (IEC).
• ICS / categories: 33.160.60, 33.160.25 (multimedia / television receiver categories).
• Edition / version: Edition 1.0 (1995).
• Number of pages: 45.

Scope

Specifies standardized interconnections and preferred matching values for satellite receiving equipment used for individual TV and sound broadcast reception within the European 10.70–12.75 GHz band. The scope covers electrical interface parameters, connector and coaxial interface details, polarization-control signalling (pulse durations and timing), and associated test requirements to ensure compatibility between transmitters, antennas and receiver front‑end equipment.

Key topics and requirements

• Frequency band and application domain: individual television and sound radio reception in the 10.70–12.75 GHz band.
• Electrical matching values and preferred impedances for interconnection of receiver front‑ends.
• Mechanical and connector specifications for coaxial and RF interfaces to ensure interchangeability.
• Polarization control and signalling requirements, including pulse durations and timing for polarization switching (examples and tolerances given).
• Test methods and recommended verification procedures to confirm conformance with the interface and signalling requirements.
• Normative references and cross‑references to related broadcast and receiver interface standards.

Typical use and users

Used by satellite receiver and LNB manufacturers, broadcast equipment designers, headend and distribution equipment suppliers, test laboratories and conformity assessment bodies to ensure mechanical and electrical compatibility of satellite reception equipment deployed in Europe. It is also referenced by national and regional standards bodies when adopting or harmonizing European satellite interconnection rules.

Related standards

IEC 61319-1 is part of the IEC 61319 series; notable related documents and equivalents include IEC 61319-2 (Part 2: Japan), EN/UNE/BS national adoptions (for example EN 61319-1:1996 / BS EN 61319-1), and later European and national standards referenced for satellite distribution and headend interfaces such as EN 60728‑5 and EN 50607.

Keywords

satellite receiving equipment, interconnection, polarization control, RF interfaces, matching values, 10.70–12.75 GHz, LNB, connectors, signalling pulses, IEC 61319.

FAQ

Q: What is this standard?

A: IEC 61319-1:1995 is an international standard titled "Interconnections of satellite receiving equipment — Part 1: Europe" that defines interface, matching and signalling requirements for satellite receivers operating in the European 10.70–12.75 GHz band.

Q: What does it cover?

A: It covers electrical and mechanical interconnection parameters, preferred matching values, connector/coaxial interface details, polarization‑control signalling (including pulse timing and duration requirements) and associated test methods to ensure interoperability.

Q: Who typically uses it?

A: Manufacturers of satellite receivers and LNBs, broadcast equipment designers, system integrators, test laboratories and standards bodies use it for product design, testing and national/regional standardization.

Q: Is it current or superseded?

A: IEC 61319-1:1995 is listed on the IEC Webstore as the published edition with a stated stability date; it is treated as the active/base publication (Edition 1.0, 1995) on official listings. Users should check national adoptions or amendments (EN versions and corrigenda) for any regional updates.

Q: Is it part of a series?

A: Yes — IEC 61319 is a series covering interconnections of satellite receiving equipment with at least a Part 2 (Japan) addressing the Japanese band allocations and related interface parameters; national and regional adoptions (EN/BS/UNE, etc.) exist for Part 1.

Q: What are the key keywords?

A: Satellite receiving equipment, interconnections, RF interface, matching values, polarization control, pulse signalling, LNB interface, 10.70–12.75 GHz, EN 61319-1, IEC.